TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial is purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may use my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site.

Thank you.

Followers

Blogs I Follow

Sunday, August 20, 2017

FTU It's Magic

This tutorial was written by me on August 20, 2017. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using a fabulous tube called "Magic Travel Book" created by Mistcheskaya.  Please do not use this tubes without a proper license.  
You can purchase it at PFD here

FTU Kit:  I am using a gorgeous kit called "Magic" created by TADD.  You can download this gorgeous kit at PFD here

Mask:  Rachel Designs mask set 150 mask 1.  You can download it here.  

Font of choice for your name.

Plug in: None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 65, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 750x750 transparent image.  We will resize later.
.
Open paper 4, copy and close the original.  Add a new raster layer, select all, edit, paste into selection.  Select none.  Apply mask and merge group.

Copy and paste your tube as a new layer.  If you are using the same tube as I am, resize 30% and add a drop shadow.

Open element 42, copy and close the original.  Select the mask layer and paste  Resize 70% and drop shadow.  Move slightly up and to the left.

Open element 48, copy and close the original.  Select the book layer and paste.  Drop shadow.  Move up slightly so it looks like she is sitting on the pillows.

Open element 46, copy and close the original.  Select the mask layer and paste.  Resize 70% and move to the bottom left so it lines up with the grass from the pillows.  Drop shadow.

Open element 69, copy and close the original.  Select the mask layer and paste.  Resize 80% and move to the left and up so you see the castle above the book.  Drop shadow.

Open element 36, copy and close the original.  Select the book layer and resize 30%.  Move to the bottom right and drop shadow.

Open element 40, copy and close the original.  Select the tree layer and paste.  Resize 70% and move to the upper right corner.  Drop shadow.

Open element 60, copy and close the original.  Select the mask layer and paste.  Resize 70% and move up and over slightly to the right.  Drop shadow.

Open element 28, copy and close the original.  Select the pillow layer and paste.  Resize 50% and move to the bottom left so it is behind the tubes knee.  Drop shadow.

Open element 43, copy and close the original.  Select the pillow layer and paste.  Resize 50% and move to the bottom left so it is behind the tubes legs.  Drop shadow.

Open element 5, copy and close the original.  Select the large tree layer and paste.  Move to the top center.

Open element 33, copy and close the original.  Select the mushroom house layer and paste.  Resize 30% and move to the bottom left so it is behind the pillows.  Drop shadow.

Open element 41, copy and close the original.  Select the top layer and paste.  Resize 40% and move to the bottom left so it is in front of her foot.  Drop shadow.

Open element 8, copy and close the original.  Select the tree layer with the castle and paste.  Resize 50% and mirror.  Move to the far left middle.  Drop shadow.

Open element 37, copy and close the original.  Select the harp layer and paste.  Resize 40% and mirror.  Move behind the mushroom house and drop shadow.

Open element 70, copy and close the original.  Select the tube layer and paste.  Resize 70% and move to the bottom left so the long daisy is just in front of her foot.  Duplicate and mirror.  Move this layer under the tube and to the far right so it covers the edge of the grass.  Drop shadow each layer.

Open element 50, copy and close the original.  Select the bottom scatter flower layer and paste.  Resize 70% and drop shadow.

Add any other elements you like.

Merge visible.

Image, resize by 600 pixels on the longest side, all layers checked.

Adjust sharpness, Unsharpen mask, radius and clipping set to 5 and strength set to 30.  Click ok.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.




Friday, July 28, 2017

PTU: Broken Wings

This tutorial was written by me on July 28, 2017. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous bonus tube called "31-2 Enys Guerrero " created by Enys Guerrero.  Please do not use this tubes without a proper license.  
You can purchase this beauty at CDO here.  

PTU Kit:  I am using a gorgeous kit called "Gothic Princess" created by Dance in the Rain.  You can purchase this gorgeous kit at her store here

Mask:  Mask 18 by Dragonfly.  You can download it here.  Select the mask to make it larger then right click and save as.

Font of choice for your name.

Plug in: None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 75, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 800x750 transparent image.  We will resize later.

Open paper 26, copy and close the original.  Add a new raster layer, select all, standing on the new layer, edit, paste into selection.  Select none and apply the mask and merge group.  Move up slightly.

Open Element 14, copy and close the original.  Paste as a new layer and move down to the bottom center.  Drop shadow.

Copy the tube and paste as a new layer.  Resize 75% and drop shadow.  Move to the bottom and slightly to the left so it looks like she is laying on the road.

Open element 43, copy and close the original.  Select the road layer and paste.  Resize 40% and move up so it is behind the tubes broken wings.  Drop shadow.

Open element 25, copy and close the original.  Select the mask layer and paste  Resize 40% and again by 80%.  Move to the upper left.  Duplicate and move to the upper right.  Drop shadow each layer.

Open element 3, copy and close the original.  Select the web layer and paste.  Move to up and slightly to the left. Drop shadow.

Open element 4, copy and close the original.  Select the web layer and paste.  Resize 50% and move to the far left so it is at the edge of the mask and behind her head.  Duplicate and move to the far right.  Drop shadow each layer.

Open element 16, copy and close the original.  Select the tube layer and paste.  Move to the far right so you can see the grass behind the candles.  Duplicate and resize 85% and move to the far right.  Drop shadow each layer.

Open element 67, copy and close the original.  Select the top white candle layer and paste.  Resize 40% and move to the far left so it covers the bottom of the candles.  Duplicate and move to the far right.  Duplicate one more time.  Move this layer above the tube layer and move to the lower right so it covers the bottom edge of the tube.  Drop shadow each layer.

Open element 15, copy and close the original.  Select the tube layer and paste.  Resize 30% and again by 95%.  Move to the bottom right so it covers the bottom edge of the tube.  Drop shadow.

Open element 50, copy and close the original.  Select the red candle layer and paste.  Resize 25% and move to the bottom right so it is behind the candle layer.  Duplicate and mirror.  Move up slightly.  I duplicated each of the two layers twice and moved them along the back.  Drop shadow each layer.

Open element 58, copy and close the original.  Select the tube layer and paste.  Resize 15% and move to the right and up slightly so it covers the edge of the tube.  Drop shadow.

Open element 8, copy and close the original.  Select the bottle layer and paste.  Resize 20% and move over the bottle so it overlaps on the left.  Drop shadow.

Open element 5, copy and close the original.  Select the bottle layer and paste.  Resize 15% and move to the bottom right so it overlaps the bottle.

Open element 44, copy and close the original.  Select the bottle layer and paste.  Resize 10% and move to the bottom right so it is between the cat and bottle.  Drop shadow.

Open element 70, copy and close the original.  Select the top layer and paste.  Resize 20%.  Image, free rotate, to the left 60 degrees.  Move to the bottom center and drop shadow.

Add any other elements you like.

Merge visible.

Crop to remove the void areas.  Be careful not to crop off any of the shadows.

Image resize by 600 pixels all layers checked.

Adjust sharpness, Unsharpen mask, radius and clipping set to 5 and strength set to 30.  Click ok.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,


Friday, July 14, 2017

FTU: Gone Bad


This tutorial was written by me on July 14, 2017. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using a fabulous bonus tube called "May-EnysGuerrero-2017 " created by Enys Guerrero.  Please do not use this tubes without a proper license.  
You can purchase Enys Guerrero's tubes at CDO here.  

FTU Kit:  I am using an awesome kit called "Gone Bad" created by Chichi Designz.  You can download this gorgeous kit here

Mask:  Dragonfly's mask 29.  You can download it here.  Left click the mask to make it larger then right click and save as.

FTU Font Captain Redemption.  You can download it here.

Plug in: None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 85, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 750x750 transparent image.  We will resize later.

Add a new raster layer and select all.

Open paper of choice.  I am using paper 11, copy and close the original.  Standing on the new layer, edit, paste into selections, select none.  Apply the mask and merge group.

Open wall, copy and close the original.  Paste as a new layer and resize 60%.  Move to the top left corner.  Duplicate and move to the bottom right.  Line up the bottom of the original to the top second row of the duplicate.  Drop shadow each layer.

Open Moon, copy and close the original.  Paste as a new layer and resize 50% and move to the top center.

Open Tree 1, copy and close the original.  Paste as a new layer and resize 80%.  Move to the upper right side.  Duplicate and resize 70%.  Move it to the left so it covers the moon.  Drop shadow each layer.

Open tape, copy and close the original.  Resize 80% and move to the left about midway.  Drop shadow.

Open Sign, copy and close the original.  Paste as a new layer and resize 50%.  Image, free rotate to the right, 15 degrees.  Move to the far right side about 1/2 way down.  Drop shadow.

Open Skull Candles, copy and close the original.  Paste as a new layer and resize 75%.  Move to the upper right corner and drop shadow.

Open Inksplat, copy and close the original.  Paste as a new layer and move slightly to the right and up.  Duplicate and resize 80%.  Move to the bottom left.  Duplicate and move to the bottom right.  Drop shadow each layer.

Open Frame 1, copy and close the original.  Resize 50% and move to the upper left, just slightly overlapping the Moon.  Using your magic wand, click inside the frame.  Selecctions, modify, expand by 5.  Add a new raster layer and move under the frame.  Flood fill with #420505.  Add another raster layer and open paper 7, copy and close the original.  Standing on the new layer, edit, paste into selection.  Change the blend mode to soft light.  Deselect.  Standing on the paper layer, merge down.  Select the frame layer and drop shadow then merge down.  It is easier if all the frame layers are merged in case you need to move it.

Open smoke, copy and close the original.  Paste as a new layer and resize 70%.  Move up slightly and drop shadow.  Use your eraser tool to erase the hard edge on the right side.  I have my size set to 50, hardness 1, all other settings set to 100.  Just click one on the bottom corner.

Open Black Rose, copy and close the original.  Paste as a new layer and resize 50% and again by 80%.  Mirror and move to the lower left so it covers the edge of the smoke.  Drop shadow.

Open Cup, copy and close the original.  Paste as a new layer and resize 45%.  Move to the bottom right so it overs the edge of the smoke.  Drop shadow.

Open tube, copy and close the original.  Paste as a new layer and resize 60% move up and to the right slightly.  Drop shadow.

Open Book, copy and close the original.  Paste as a new layer and resize 40%.  Move to the left so it covers the edge of the tube.  Drop shadow.

Open Smoke again, copy and close the original.  Paste as a new layer and resize 60% and move to the bottom so it covers the edge of the tube.  Duplicate and merge down.  Drop shadow.

Open Chrome Chain, copy and close the original.  Paste as a new layer and resize 70%.  Move to the bottom of the smoke so it covers the bottom edge.  Drop shadow.

Open WebDoodle, copy and close the original.  Paste as a new layer and resize 70%.  Move the the bottom center and drop shadow.

Open Skull 1, copy and close the original.  Paste as a new layer and resize 35% and again by 80%.  Move to the center of the webdoodle and drop shadow.

Open Candle 1, copy and close the original.  Paste as a new layer and resize 25%.  Move to the bottom right corner.  Duplicate and mirror.  Move the duplicate so it covers the edge of the book.  Drop shadow each layer.

Open Candle, copy and close the original.  Paste as a new layer and resize 20%.  Move to the bottom right so it is over laping the red candle.  Duplicate and mirror.  Repeat position for the left candle.  Drop shadow each layer.

Open Flame, copy and close the original.  Paste as a new layer and resize 15%  Move over the left red candle.  Duplicate and move over the grey candle.  Repeate for the remainding 2 candles.

Open Black rose again, copy and close the original.  Paste as a new layer and resize 15%.  Move to the bottom right so it covers the bottom of the candles.  Duplicate and mirror.  Move slightly over to the left.  Drop shadow each layer.

Open FeatherRose, copy and close the original.  Paste as a new layer and resize 30%.  Move to the bottom right so it covers the edge of the smoke and candles.  Duplicate and mirror.  Move slightly to the left.  Drop shadow each layer.

Add any other elements you like.

Merge visable.

Image, resize by 600 pixels on the longest side, all layers checked.

Adjust sharpness, Unsharpen mask, radius and clipping set to 5 and strength set to 30.  Click ok.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.



Tuesday, July 11, 2017

PTU Panda Sanctuary

This tutorial was written by me on July 10, 2017. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called "Red Panda" created by Verymany.  Please do not use this tubes without a proper license.  
You can purchase this beauty at VeryMany's store here.  

PTU Kit:  I am using a simply gorgeous Matching kit called "Orient Sanctuary" created by Pink Paradox Productions.  You can purchase this gorgeous kit at her store here

Mask:  Mask 93 by Moonbeams and Spiderwebs.  You can download it here.  Select the second mask to make it larger then right click and save as.

FTU Font Shanghai.  You can download it here.

Plugin: None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 75, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 750x700 transparent image.  We will resize later.

Add a new raster layer and select all.  Open paper 30, copy and close the original.  Select your new raster layer.  Edit, paste into selection, select none.  Apply your mask and merge group.  Resize the mask by 90%.  Duplicate and merge down.

Open Frame 12, copy and close the original.  Select the mask layer and paste.  Resize 40%.  Using your magic wand, click inside the frame.  Selections, modify, expand by 10.  Open paper 29, copy and close the original.  Add a new raster layer and drag it under the frame.  Standing on the new layer, edit, paste into selections.  Do not deselect.  Copy your tube and paste above the paper layer.  Move until his cute face is in the frame.  Once happy with the placement, selections, invert and standing on the tube layer, hit delete on your keyboard.  Change the blend mode to soft light.  Drop shadow the frame.  Merge down the tube and paper layer.  Select the frame layer and merge down one more time.  Move the frame up slightly.

Open element 105, copy and close the original.  Select the frame layer and paste.  Resize 60% and move to the bottom of the frame.  Be careful not to go off the canvas.  Drop shadow.

Copy your tube and paste as a new layer.  Resize 35% and drop shadow.  Move the panda up and to the right so it looks like he is sitting on the log.

Open element 58, copy and close the original.  Select the mask layer and paste.  Resize 60% and move down.  

Open element 59, copy and close the original.  Select the water layer and paste.  Resize 60% and move down and to the left so it covers the edge of the water.  Drop shadow.

Open element 62, copy and close the original.  Select the water layer and paste.  Resize 30% and move to the bottom left so it covers the edge of the water.  Drop shadow.

Open element 50, copy and close the original.  Select the mask layer and paste.  Resize 60% and move up and slightly to the left so you can see the roof over the frame.  Drop shadow.

Open element 92, copy and close the original.  Select the water layer and paste.  Resize 40% and move to the far right.  Duplicate and move to the far left so it is under the rock.  Drop shadow each layer.

Open element 94, copy and close the original.  Select the water layer and paste.  Resize 40% and mirror.  Move to the far left and up slightly.  Duplicate and move this layer above the frame layer and move to the right of the frame so it is behind the panda.  Drop shadow each layer.

Open element 77, copy and close the original.  Select the log layer and paste.  Resize 35% and move to the far right so it is peeking out from behind the panda.  Duplicate and mirror.  Move to the left so you see it behind the tail.  Drop shadow each layer.

Open element 86, copy and close the original.  Select the top flower layer and paste.  Resize 30% and move in front of the left flower layer.  Drop shadow.

Open element 84, copy and close the original.  Select the top layer and paste.  Resize 15% and move to the bottom left so it is in front of the tail and hiding the bottom of the flower that is sticking out from the tail.  Duplicate and move this layer under the panda.  Move slightly to the right so it hides the flower on the bottom.  Drop shadow each layer.

Open element 73, copy and close the original.  Select the panda layer and paste.  Resize 10% and move to the left so it is slightly covering the berries.  Duplicate and move to the right side of the log.  Drop shadow each layer.

Open element 36, copy and close the original.  Select the top layer and paste.  Resize 25% and move to the bottom left so it covers the grass and part of the log end.  Drop shadow.

Open element 8, copy and close the original.  Select the water layer and paste.  Resize 15% and move the frog to the bottom right so he is behind the grass and almost to the edge of the water.  Drop shadow.

Open element 6, copy and close the original.  Select the top layer and paste.  Resize 15%, image, free rotate to the left 20 degrees.  Move to the upper left of the frame.  Duplicate and move to the bottom grass of the log.   Drop shadow each layer.

Open element 7, copy and close the original.  Select the top layer and paste.  Resize 15%, image, free rotate to the right 20 degrees.  Move to the top of the center flowers.  Duplicate and resize 90% and move to the upper left so it is on the trees.

Add any other elements you like.

Merge visible.

Image resize by 600 pixels all layers checked.

Adjust, Sharpness, unsharpen mask,  Radius and Clipping set to 5, Strength set to 30.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,


Friday, June 23, 2017

FTU: Blue Angel

This tutorial was written by me on June 23, 2017. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called "Midnight Angel " created by Alex Prihodko.  Please do not use this tubes without a proper license.  
You can purchase this beauty at PFD here.  

FTU Kit:  I am using a simply gorgeous kit called "Feeling Blue 2" created by Chaos Priestess.  You can download this gorgeous kit here

Mask:  MB and SW Mask 74.  You can download it here.  Left click the mask to make it larger then right click and save as.

Font of choice for your name.

Plugin: None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 85, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 750x750 transparent image.  We will resize later.

Open paper 6, copy and close the original.  Select raster 1 and add a new raster layer.  Select all, standing on the new layer, paste into selection.  Select none.  Apply the mask and merge group.  Resize 90% and mirror.

Open BackdropE1, copy and close the original.  Select the mask layer and paste.

Copy your tube and paste.  Resize 40% and drop shadow.

Open frame El02, copy and close the original.  Select the backdrop layer and paste.  Using your magic wand, click inside the frame.  Sections, modify, expand by 5.  Open paper of choice.  I used paper 1, copy and close the original.  Select the backdrop layer and add a new raster layer.  Standing on the new layer, edit paste into selections, select none.  Drop shadow the frame.

Open HeartEl02, copy and close the original.  Select the frame layer and paste.  Resize 70% and mirror.  Move to the upper left side.  Drop shadow.

Open ButterflyEl02, copy and close the original.  Select the heart layer and paste.  Resize 60% and move to the upper right so only the dark blue butterfly shows.  Drop shadow.

Open FeatherEl, copyy and close the original.  Select the butterfly layer and paste.  Resize 60% and move to the bottom left.  Drop shadow.

Open RosePetals, copy and close the original.  Select the feather layer and paste.  Move to the bottom so it looks like the tubes foot is resting on it.  Drop shadow.

Open Wordart El01, copy and close the original.  Select the top layer and paste.  Move to the bottom center and drop shadow.

Open StringEL01, copy and close the original.  Select the top layer and paste.  Resize 50% and move to the bottom of the wordart.  Drop shadow.

Open HeartEl01, copy and close the original.  Select the backdrop layer and paste.  Move to the far right and drop shadow.

Open FlowerEl03, copy and close the original.  Select the feather layer and paste.  Resize 60% and move to the bottom left corner.  Duplicate and move to the right so it is behind her knees.  Drop shadow each layer.

Open ButterflyEl01, copy and close the original.  Select the top layer and paste.  Resize 30% and move to the top left of the wordart.  Dupicate and mirror.  Move to the bottom right corner of the wordart.  Drop shadow each layer.

Open LeavesEl01, copy and close the original.  Select the feather layer and paste.  Resize 40% and move to the right so it is behind the black flower.  Duplicate and free rotate 20 degrees to the right.  Move down and slightly to the left.  Duplicate the original layer one more time and move this layer above the top black flower.  Move to the bottom right so it is behind the petals and right corner of the wordart.  Drop shadow each layer.

Add any other elements you like.

Merge visable.

Crop to remove the excess blank area.

Image, resize by 600 pixels on the longest side, all layers checked.

Adjust sharpness, Unsharpen mask, radius and clipping set to 5 and strength set to 35.  Click ok.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.


Tuesday, June 20, 2017

FTU Blue Feeling


This tutorial was written by me on June 20, 2017. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called "Violetta " created by Misticheskaya.  Please do not use this tubes without a proper license.  
You can purchase this beauty at PFD here.  

FTU Kit:  I am using a simply gorgeous kit called "Feeling Blue" created by Chaos Priestess.  You can download this gorgeous kit here

Mask:  Dragonfly's mask 21.  You can download it from her blog here.  Left click the mask to make it larger then right click and save as.

Font of choice for your name.

Plugin None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 85, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 750x800 transparent image.  We will resize later.

Open Paper 7, copy and close the original.  Add a new raster layer.  With the new layer selected go to edit, paste into selection, select none.  Apply mask and merge group.  Resize 90%.

Ope backdrop, copy and close the original.  Select the mask layer and paste.

Open chickenwire, copy and close the original.  Select the mask layer and paste.  Move to the upper left and drop shadow.

Open Moon El2, copy and close the original.  Select the chickenwire and paste.  Resize 70% and move up slightly.  Drop shadow.

Open frame 1, copy and close the original.  Select the backdrop layer and paste.  Move to the right.  Using your magic wand, click in the center of the frame.  Selections, modify, expand by 5.  Add a new raster layer and move this under the frame.  Open paper of choice.  I am using paper 6, copy and close the original.  Select the new raster layer, edit, paste into selection.  Select none and drop shadow the frame.

Copy your tube and select the top layer.  Paste and resize 35%.  Drop shadow.  Move the tube up slightly.

Open HeartEL01, copy and close the original  Select the frame layer and paste.  Image, free rotate to the left 20% and drop shadow.

Open element 1, copy and close the original.  Select the heart layer and paste.  Resize 40%.  Duplicate and mirror.  Move the duplicate to the bottom right so it peeks out from behind the tube and move the original to the upper left of the tube.  Drop shadow each layer.

Open StringEL02, copy and close the original.  Select the frame layer and paste.  Resize 80% and move to the upper left.  Drop shadow.

Open HeartEl02, copy and close the original.  Select the heart1 layer and paste.  Resize 60% and move to the bottom left so it is touching the 8.  Duplicate and mirror.  Move to the top right so it peeks out from behind the tube.  Drop shadow each layer.

Open element MS1, copy and close the original.  Select the top flower layer and paste.  Resize 80% and move to the bottom left so it is behind her feet.  Drop shadow.

Open element MS2, copy and close the original.  Select the top layer and paste.  Resize 80% and move to the bottom so it is in front of her knees.  Drop shadow.

Open Flower 5, copy and close the original.  Select the tube layer and paste.  Resize 40% and duplicate.  Move the duplicate to the top right corner of the blue sign and move the original to the left side of the blue sign.  Drop shadow each layer.

Open Winged Heart, copy and close the original.  Select the top layer nad paste.  Resize 30% and move to the bottom right of the blue sign.  Drop shadow.

Open flower 4, copy and close the original.  Select the top flower layer under the tube and paste.  Resize 40% and move under the right side of the feelings sign.  Duplicate and mirror.  Move to the left side of the sign and down a bit.  Drop shadow each layer.

Open Flower 3, copy and close the original.  Select the flower 4 layer and paste.  Resize 40% and move to the bottom left behind the feeling sign.  Drop shadow.

Open Butterfly, copy and close the original.  Select the flower 3 layer and paste.  Resize 60% and free rotate 20 degrees to the left.  Move to the lower left just above the flower.  Duplicate and move this layer to the top.  Mirror and resize 60%.  Move to the bottom left of the blue sign.  Drop shadow each layer.

Add any other elements you like.

Merge visable.

Crop to remove the blank area.

Image, resize by 600 pixels on the longest side, all layers checked.

Adjust sharpness, Unsharpen mask, radius and clipping set to 5 and strength set to 30.  Click ok.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.



Sunday, June 18, 2017

FTU: Mindful Angel

This tutorial was written by me on June 18, 2017. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called "61-3 Enamorte " created by Enamorte.  Please do not use this tubes without a proper license.
You can purchase this beauty at CDO here.  

FTU Kit:  I am using a simply gorgeous kit called "Mindful Angel" created by Chaos Priestess.  You can download this gorgeous kit here

Mask:  Mask set 150 mask 1 created by Rachel Designs.  You can download it from her blog here.  

Font of choice for your name.

Plugin: None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 85, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 750x800 transparent image.  We will resize later.

Open paper 6, copy and close the original.  Add a new raster layer.  Select all, select the new raster layer, edit, paste into selection.  Select none.  Apply Mask 1 and merge group.

Open clock, copy and close the original.  Select the mask layer and paste.  Resize 70% and move to the upper right corner of the mask.  Drop shadow.

Open frame 2, copy and close the original.  Select the clock layer and paste.  Resize 70% and move to the upper left corner of the mask.  Using your magic wand, click inside the frame.  Selections, modfiy and expand by 5.  Add a new raster layer and move it under the frame.  Open paper 3, copy and close the original.  Select the new raster layer, edit, paste into selection.  Copy your close up tube and paste as a new layer.  Move the face into the frame slightly over to the left.  Selections, invert and while standing on the tube layer, hit delete on your keyboard.  Select none. Change the blend mode to Luminance (L) and lower the opacity to 70. Drop shadow the frame.

Open Hanging tears, copy and close the original  Select the tube layer and paste.  Resize 60% and move to the center of the frame.  Drop shadow.

Copy your main tube.  Select the top layer and paste.  Resize 80% and move up and slightly to the right.  Drop shadow.

Open Doodle, copy and close the original.  Select the mask layer and paste.  Move to the far left and up.  Drop shadow.

Open Parchement, copy and close the original.  Select the frame layer and paste.  Resize 75% and mirror.  Image, free rotate to the right 20 degrees.  Move to the far right and drop shadow.

Open NP2, copy and close the original.  Select the frame layer and paste.  Move to the bottom of the frame.  Drop shadow.

Open flower 2, copy and close the original  Select the frame layer and paste.  Move to the lower left corner.  Duplicate and mirror.  Move slightly over to the right and drop shadow each layer.

Open Foliage, copy and close the original.  Select the mask layer and paste.  Resize 50% and mirror.  Move to the left side of the frame.  Drop shadow.

Open Butterfly with Glitter, copy and close the original.  Select the top layer and paste.  Resize 60% and move to the bottom left so it covers the top rough edge of the tube.  Drop shadow.

Open flower 3, copy and close the original.  Select the tube layer and paste.  Resize 40% and move to the bottom center of the tube.  Duplicate and move to the upper left so it covers the tube and NP2 corner.  Drop shadow each layer.

Open Foliage again, copy and close the original.  Select the tube layer and paste.  Resize 30% and free rotate to the right 90 degrees.  Move to the bottom right.  Duplicate and mirror.  Duplicate the original again and move under the right side of the center rose.  Duplicate the left foliage and move under the left side of the center rose.  Drop shadow each layer.

Open Flower 1, copy and close the original.  Select the bottom foliage layer and paste.  Resize 30% and move to the bottom right.  Duplicate and mirror.  Move this layer under the top foliage layer and down to the bottom left.  Drop shadow each layer.

Open heart, copy and close the original.  Select the tube layer and paste.  Resize 60% and move to the far bottom right so it covers the edge of the tube.  Drop shadow.

Open Flower 4, copy and close the original.  Select the top foliage layer and paste.  Resize 35% and move to the bottom right of the center rose.  Duplicate and mirror.  Move slightly to the right so it is closer to the center rose.  Drop shadow each layer.

Add any other elements you like.

Merge visable.

Image, resize by 600 pixels on the longest side, all layers checked.

Adjust sharpness, Unsharpen mask, radius and clipping set to 5 and strength set to 40.  Click ok.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.


Search

My Banner

Gwils Creations blinkie 2

Copyright Protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

Say Hi

Labels